4
Assembly
• Check to be sure the upper frame tubes are secure in the
frame. If you can remove the upper frame tubes from the
frame, you have not properly inserted the tubes into the
frame. Remove the upper frame tubes from the frame and
repeat Assembly step 4.
• Fit the lower swing arm assembly to the outer side of the
upper swing arms.
Frame
Upper Frame
Tube
Upper Frame
Tube
Lower Swing Arm Assembly
(with Restraint System)
Upper Swing Arms
5
6
• Position the seat back tube so that it curves toward the back
of the swing.
• While pressing the buttons on the seat back tube, fit the
seat back tube into the short tubes on the swing arms.
• Push the seat back tube until it
“clicks”
into place.
• Pull up on the seat back tube to be sure it is secure to the
swing arms.
Seat Back Tube
Buttons
Swing Arm Short Tubes
8
7
• Insert two #6 x 1,9 cm screws through the upper swing arm
and into the lower swing arm. Tighten the screws.
