background image

2

W2602pr-0920

IMPORTANT INFORMATION

ELECTRICAL HAZARD

RIDING HAZARD

• To prevent electric shock, do not immerse in water; wipe clean with a damp cloth.

   DANGER

   WARNING

   WARNING

Battery can fall out and injure a child if vehicle tips over. Always use battery retainer. 

• 

PREVENT FIRE

• 

 -  Never modify the electrical system. Alterations could cause a fi re resulting in 

serious injury and could also ruin the electrical system. 

 -  Use of the wrong type battery or charger could cause a fi re or explosion resulting 

in serious injury. 

 -  Use of Power Wheels

®

 components in products other than Power Wheels

®

 

vehicles could cause overheating, fi re or explosion. 

The battery must be handled by adults only. The battery is heavy and contains 

• 

sulfuric acid (electrolyte). Dropping the battery could result in serious injury. 
Never allow children to charge the battery. Battery charging must be done by adults 

• 

only. A child could be injured by the electricity involved in charging the battery. 
Read the safety instructions on the battery. 

• 

Examine the battery, charger and their connectors for excessive wear or damage 

• 

each time you charge the battery. If damage or excessive wear is detected, do not 
use the charger or the battery until you have replaced the worn or damaged part. 

HOT

• 

 motors. Handle carefully. 

Prevent Injuries and Deaths

• 

 Direct Adult Supervision Required.

• 

Never Ride at Night.

• 

Keep Children Within Safe Riding Areas. 

• 

These areas must be:

Away from swimming pools and other bodies of water to prevent drownings.

 

-

Generally level to prevent tipovers.

 

-

Away from steps, steep inclines, cars, roads and alleys.

 

-

Riding Rules 

• 

Make sure children know and follow these rules for safe driving and riding.

Always sit on the seat.

 

-

Always wear shoes.

 

-

Only 2 (two) riders at a time.

 

-

Содержание DUNE RACER W2602





























Отзывы: