4
Battery
Replacement
Battery Safety
Information
• For longer life, use
alkaline
batteries.
• Locate the battery compartment door on
the back of the wand and the bottom of
the palace.
• Loosen the screw in each battery compartment
door with a Phillips screwdriver and remove
each door. Remove the exhausted batteries and
dispose properly.
• Insert two, new AAA (LR03)
alkaline
batteries in the wand, and three, new AA
(LR6)
alkaline
batteries in the palace.
• Replace each battery compartment door and
tighten the screws. Do not over-tighten.
• If the palace or the wand begin to operate
erratically, you may need to reset the
electronics. Slide the power/volume switch
on the bottom of the palace, off and back on.
Remove the batteries from the wand
and reinstall them.
• When sounds or lights from the place, or
lights from the wand become faint or stop,
it’s time for an adult to change the batteries.
1,5V x 2
AAA (LR03)
1,5V x 3
AA (LR6)
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable.
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Wand
Palace
