Label Decoration
• At an angle, insert the tabs on the seat into any of the top three
sets of slots for the lower, middle or upper position.
• Lower the seat so that the seat retainer inserts and snaps into
the slots in the frame.
• Pull up on the seat to be sure it is secure.
Hint:
The seat can be attached to the frame in any of three
positions, depending on the size of your child. Check your child’s
fit on the trike by observing the seat to pedal distance, as it is
being ridden. If the pedals seem too far away or too close for your
child, move the seat up or down.
• Make sure the areas where the labels will be applied are clean
and dry. Wipe your vehicle with a clean, soft, dry cloth to
remove any dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
• After applying the label, rub the label firmly with a cloth to make
sure the label is adhered to your vehicle.
Lower Position
Middle Position
Upper Position
Attaching the Seat
6
15 (Label 16
opposite side)
4 (Label 5
opposite side)
17 (Label 18
opposite side)
8 (Labels 8
opposite side)
SIDE VIEW
DASH VIEW
13
12
1
2
14
3
9 (Label 10
opposite side)
19
11
Tabs
Slots
Seat
Retainer
6 (Label 7
opposite side)