background image

20

T6137pr-0920

Check all screws and their protective coverings 

• 

regularly and tighten as required. Check plastic parts 
on a regular basis for cracks or broken pieces. 
During snowy or rainy weather, the vehicle should be 

• 

stored inside or under a protective cover.
Avoid operating the vehicle in wet or snowy conditions. 

• 

Water or moisture in the motors or electrical switches 
can cause them to corrode, and could cause switch 
or motor failure. 
Avoid operating the vehicle on sand, loose dirt or gravel. 

• 

Sand, loose dirt or gravel in the motors or electrical 
switches can cause them to jam, and could cause 
switch or motor failure.
The vehicle can be wiped down with a soft, dry cloth. 

• 

For a shiny fi nish, you can wipe plastic parts with 
a non-wax furniture polish applied to a soft cloth. 
Do not use automotive wax. Do not use soap and 
water or spray the vehicle with a hose. 
To ensure your vehicle stays in good operating order, 

• 

we recommend you periodically have your vehicle 
checked by a Power Wheels

®

 authorized service center.  

VEHICLE CARE

Bumper-to-Bumper* Limited Warranty

*One year limited warranty from the date 

of purchase on the Power Wheels

®

 vehicle.

Six month limited warranty on the 

12 volt battery.

For the original purchaser, this one year limited warranty 
covers the Power Wheels

®

 ride-on vehicle (purchased 

from Power Wheels

®

) against defects in materials and 

workmanship. The six month limited warranty applies 
only to the 12 volt battery included by Power Wheels

®

 

with the original purchase of the vehicle. This warranty 
covers normal use and does not cover the Power Wheels

®

 

vehicle or battery if damaged by unreasonable use, 
neglect, accident, abuse, misuse, improper service or 
other causes not arising out of defects in materials or 
workmanship. Evidence of any attempt at consumer 
repair will void this warranty. THIS WARRANTY DOES 
NOT COVER, AND IS INTENDED TO EXCLUDE, 
ANY LIABILITY ON THE PART OF POWER WHEELS

®

WHETHER UNDER THIS WARRANTY OR IMPLIED 
BY LAW FOR ANY INDIRECT OR CONSEQUENTIAL 
DAMAGES FOR BREACH OF WARRANTY. SOME STATES 
DO NOT ALLOW THE EXCLUSION OR LIMITATION SO 
THIS LIMITATION MAY NOT APPLY TO YOU. 
Should you need service or assistance with your vehicle 
during the warranty period, do not return the vehicle 
to the store. Power Wheels

®

 has provided a nationwide 

network of authorized service centers. If there is not an 
authorized service center in your area, please visit us 
on-line at 

www.powerwheels.com

 or call Consumer 

Relations for information, 

1-800-348-0751

.

This warranty gives you specific legal rights, and you may 
also have other rights which may vary from state to state.

PLEASE SAVE YOUR ORIGINAL SALES RECEIPT.

LIMITED WARRANTY

If a battery leak develops, 

avoid contact with the 

leaking acid and place the damaged battery in a plastic 
bag. See next section for proper disposal.

If acid comes in contact with skin or eyes, 

fl ush with 

cool water for at least 15 minutes and call a physician.

If acid is internally ingested, 

give water, milk of 

magnesia or egg whites immediately. Never give 
emetics or induce vomiting. Call a physician.

Do not allow the battery to run down completely 

• 

before charging.
Charge the battery before storing the vehicle, and at least 

• 

once per month, even if the vehicle has not been used.
Charge the battery after each use, regardless of how 

• 

long the vehicle was used.
Leaving the battery in a discharged condition will ruin it. 

• 

Always remove an exhausted battery from the vehicle. 

• 

Battery leakage and corrosion can damage the vehicle.
Do not store the battery in temperatures above 

• 

75° F or below -10° F.

Your Power Wheels

• 

®

 battery is a non-spillable, sealed 

lead-acid battery. It must be recycled or disposed 
of in an environmentally sound manner.
Do not dispose of a lead-acid battery in a fi re. The 

• 

battery may explode or leak.
Do not dispose of a lead-acid battery in your regular, 

• 

household trash. The incineration, landfi lling or mixing 
of sealed lead-acid batteries with household trash is 
prohibited by law in most areas.
Protect the environment by not disposing of this 

• 

product with household waste (2002/96/EC). Check 
your local authority for recycling advice and facilities 
(Europe only).
Return an exhausted battery to a federal or state 

• 

approved lead-acid battery recycler, such as 
a Power Wheels

®

 authorized service center or a local 

seller of automotive batteries. Contact your local waste 
management offi cials for other information regarding 
the environmentally sound collection, recycling and 
disposal of lead-acid batteries. If you live in the State 
of Florida or the State of Minnesota, it is prohibited by 
law for anyone to throw away lead-acid batteries in the 
municipal waste stream.

BATTERY CARE

BATTERY DISPOSAL

Содержание Dora The Explorer Jeep Wrangler T6137

























Отзывы: