3
In exceptional circumstances, batteries may
leak fluids that can cause a chemical burn
injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries
of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
Battery
Installation
Battery Safety
Information
1,5V x 3
AA (LR6)
• For longer life, use
alkaline
batteries.
• Locate the battery compartment door on
the arch.
• Loosen the screws in the battery
compartment door with a Phillips screwdriver
and remove the door.
• Insert three, AA (LR6)
alkaline
batteries.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
• If this toy begins to operate erratically, you
may need to reset the electronics. Slide the
power/volume switch off and back on.
• When sound becomes faint or stops, it’s time
for an adult to change the batteries.
• Protect the environment by not
disposing of this product with
household waste (2012/19/EU).
Check your local authority for
recycling advice and facilities.
Power/Volume Switch
Mode Switch
• Slide the power/volume switch on the
electronic toy to ON with low volume
, ON
with high volume
or OFF .
• Slide the mode switch to
Lay & Play
or
Tummy Time
or
Sit & “Drive”
.
