2
Battery Installation
1,5V x 3
AA (LR6)
• Open the fasteners on the back of the
tummy wedge.
• Remove the electronic unit from inside
the tummy wedge.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver and remove
the door.
• Insert three, AA (LR6)
alkaline
batteries.
• Replace the battery compartment door and
tighten the screw. Do not over-tighten.
• Fit the electronic unit back inside the
tummy wedge.
• Make sure the electronic unit button/speaker
is facing the front side of the tummy wedge.
• Make sure the power/volume and mode
switches on the electronic unit face out.
• Close the fasteners.
• If this toy begins to operate erratically, you
may need to reset the electronics. Slide the
power/volume switch off and back on.
• When sound/vibrations become faint or stop,
it’s time for an adult to change the batteries.
• Protect the environment by not
disposing of this product with
household waste (2013/19/EU).
Check your local authority for
recycling advice and facilities.
For longer life, use
alkaline
batteries.
