4
Assembly
1
Frame
Curved Tubes
Frame
Curved Tubes
Base Tubes
• Position the frames on a flat surface so that the curved
tubes face each other.
• Fit a base tube into the ends of each frame’s curved tube,
as shown.
• Align the holes in the base tube and curved tubes. Insert
an M4 screw through the hole in each end of the base
tube, the curved tubes and into the lock nut inside each
curved tube.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• Repeat this procedure to assemble the other base tube
into each frame’s curved tube.
Hint:
M4 lock nuts have been assembled to the curved tubes
at the factory. During shipment of this product, they may
have fallen out. Check to be sure there is a lock nut in each
hexagonal opening in the curved tubes. If one (or more) has
fallen out, fit the lock nut into the hexagonal opening in the
curved tube. Make sure the rounded side of the lock nut
is facing out.
Shown Actual Size
M4 Shoulder Screw - 4
M4 Lock Nut
(Inside Frame Curved Tube) - 2
Rounded
Side
IMPORTANT!
Before each use or assembly, inspect this
product for damaged hardware, loose joints, missing parts
or sharp edges.
DO NOT
use if any parts are missing or
broken. Contact Fisher-Price® for replacement parts and
instructions if needed. Never substitute parts.
This package contains small parts
in its unassembled state.
Adult assembly is required.
CAUTION
