Stage 1 - Lay & Play Gym
• While pressing the star buttons on a support, fit the end
of the support into the large slot in one of the legs, as
shown. Push the support until it “snaps” into place.
• Repeat this procedure to attach the other support to the
remaining leg.
1
1
• Slide the mode switch to
for shorter play. When
baby bats the toys, a single song plays with “singing”
light-up stars.
• Slide the mode switch to
for longer play. When baby bats
the toys, the music plays for about 10 minutes with “singing”
light-up stars.
• Locate the volume switch on the bottom of the keyboard.
Adjust volume to high
; or low
, for your child’s comfort.
Stage Switch
Mode Switch
• Slide the stage switch to
for use with babies
lying down.
Hint: If your child is not actively playing with this toy, it
turns off automatically (sleep mode).
• Be sure to slide the stage switch to the off
position
when not in use.
3
3
• Grasp each hanger under the keyboard and pull it
down so it swings freely.
• Attach the toys to the hangers as shown.
• Position the keyboard so it faces you.
• Fit a leg assembly to the side of the keyboard, as shown.
• Turn the knob clockwise to secure the leg assembly to
the keyboard. Make sure the knob is fully tightened.
• Repeat this procedure to attach the other leg assembly
to the keyboard.
2
2
Leg Assembly
Knob
Hanger
Leg Assembly
Volume Switch
4
Star Button
Support
Leg
Large Slot
