4
Tab
Hanger
• Rotate the hangers up and
“snap”
them into place.
• Attach the toys to the hangers and tabs as shown.
• While pressing the star buttons on a support, fit the end of the support
into the large slot in one of the legs, as shown. The support should
“snap”
in place.
• Repeat this procedure to attach the other support to the remaining leg.
Star Button
Large Slot
Support
• Slide the mode switch to
. When baby presses a key, part of a song
plays with twinkling lights. With each press of a key, the song continues
building, a little at a time.
• Slide the mode switch to
. When baby presses a key, musical scales
or chords play as twinkling lights follow along.
Hint:
If your child is not actively playing with this toy, it turns off
automatically (sleep mode).
• Be sure to slide the stage switch to the off
O
position when not in use.
• Slide the stage switch to
for use with babies sitting up.
Leg
• Position the keyboard so it faces up.
• Fit a leg assembly to the side of the keyboard, as shown.
• Turn the knob clockwise to secure the leg assembly to the keyboard.
Make sure the knob is fully tightened.
• Repeat this procedure to attach the other leg assembly to the keyboard.
Leg Assembly
Leg Assembly
Knob
To change from Stage 1 to Stage 2
• Turn the threaded knobs counter-clockwise and detach
the leg assemblies from the keyboard.
• Press the star buttons and remove the two
supports from the legs. Now, proceed to step 2.
If you have not used this toy before, and are assembling it for
first-time use in Stage 2, start with Step 2.
2
Stage 2 - Sit & Play
1
3
5
Stage Switch
Mode Switch
