8
6
7
5
• Fit the cross brace between the side rails,
as shown.
Hint:
The cross brace is designed to fit one way.
If it does not seem to fit, turn it around and
try again.
• Insérer la traverse entre les montants latéraux,
comme illustré.
Remarque :
La traverse est conçue pour être
fixée dans un sens seulement. Si elle ne semble
pas s’insérer correctement, essayer dans
l’autre sens.
• Insert an M5 x 30 mm screw through the
outside of each side rail and into the ends of
the cross brace.
IMPORTANT!
Please follow the next assembly
(step 7) carefully to completely secure the cross
brace to the side rails.
• Fit a retainer with lock nut onto the end of each
screw and to the inside of a side rail. Tighten
the screws.
• Fixer un dispositif de retenue avec
contre-écrou sur l’extrémité de chaque vis et
à l’intérieur d’un montant latéral. Serrer les vis.
Assembly Assemblage
Cross Brace
Traverse
Retainers with Lock Nut
Dispositifs de retenue
avec contre-écrou
Screws
Vis
• Insérer une vis M5 de 30 mm dans le côté
extérieur de chaque montant latéral, jusque
dans les extrémités de la traverse.
IMPORTANT!
Suivre attentivement les
instructions d’assemblage suivantes (étape 7)
afin de fixer solidement la traverse aux
montants latéraux.