Battery
Replacement
• Loosen the screws in the battery
compartment with a Phillips
screwdriver. Lift to remove the battery
compartment. Remove the exhausted
batteries and dispose properly.
• Insert four, new AA (LR6)
alkaline
batteries.
• Replace the battery compartment and
tighten the screws. Do not over-tighten.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power switch off and then
back on.
• When sounds/movement become
faint or stop, it’s time for an adult to
change the batteries.
Battery Safety
Information
In exceptional circumstances,
batteries may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
• Protect the environment
by not disposing of this
product with household waste
(2002/96/EC). Check your
local authority for recycling
advice and facilities.
For longer life, use
alkaline
batteries.
1,5V x 4
AA (LR6)
