Battery Replacement
In exceptional circumstances, batteries may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted
batteries from the product. Dispose of batteries safely. Do not dispose of this
product in a fire. The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged
under adult supervision.
1,5V x 2
AAA (LR03)
Battery Safety Information
• For longer life, use
alkaline
batteries.
• Locate the battery compartment on the bottom of the toy.
• Loosen the screws in the battery compartment door with a Phillips
screwdriver. Remove the battery compartment door.
• Remove the exhausted batteries and dispose of them properly.
• Insert two, new AAA (LR03)
alkaline
batteries.
• Replace the battery compartment door and tighten the screws.
• If this toy begins to operate erratically, you may need to reset the electronics.
Press the power button to turn off and back on.
• When sounds become faint or stop, it’s time for an adult to change the batteries.
• Protect the environment by not disposing of this product with
household waste (2002/96/EC). Check your local authority for
recycling advice and facilities.
Note:
To avoid moisture in the battery
compartment, replace the battery
compartment door after replacing
batteries. Tighten the screws in the
battery compartment door with a Phillips
screwdriver. Make sure the battery
compartment door is fully assembled,
according to these instructions, when
using this toy in water.
