5
Battery Installation
• Lower the motor so that the open peg fits
into the groove in the base.
• Insert the battery plug into the socket in
the motor, as shown.
Hint:
If there isn’t a socket inside the peg,
you positioned the motor/chute assembly
backwards in the base. Remove the motor/
chute assembly and turn it around. Repeat
assembly step 4.
• Fit the cover over the peg and plug and
into the base.
• Insert two screws into the cover and tighten.
Socket
Plug
Groove
Cover
Peg
Plug
• Loosen the screws in the battery
compartment door and remove the
battery compartment door.
• Insert four "D" (LR20)
alkaline
batteries
into the battery compartment.
Hint:
We recommend using
alkaline
batteries for longer battery life.
• Replace the battery compartment door
and tighten the screws.
• When ball release distance is greatly
reduced or if the time between ball
releases is long, it’s time for an adult to
replace the batteries!
• If this product begins to operate erratically,
you may need to reset the electronics.
Slide the power switch off and then
back on.
Protect the environment by not
disposing of this product with
household waste (2002/96/EC).
Check your local authority
for recycling advice and facilities
(Europe only).
1,5V x 4
"D" (LR20)
Battery Compartment
Assembly
5
6
