Helmet Use
One-Time Assembly
• Insert four M5 x 25 mm screws into the base
of the handle.
• Hand-tighten the screws.
• Turn the handle upside-down to be sure the
screws are attached to the base.
Hint:
Once the screws are attached to the
base of the handle, they cannot be removed.
Your child needs a helmet (not included)
specifi cally designed for skateboarding.
Skateboarding helmets can withstand multiple
impacts and provide additional coverage for
the back of the head.
Your child must always wear a helmet when
using this product. Helmets reduce the energy
of some impacts, minimizing or preventing
head injuries. Make sure your child’s helmet
has a label stating/certifying conformance with
the applicable certifying agency and includes
the intended age requirement for use with a
child. In addition, children ages 1 to 5 years
require helmets specifi cally designed and
labeled for younger children. These helmets
cover a larger portion of the head and provide
more protective coverage than any other
helmets for older persons.
For maximum protection during an impact,
the helmet must be properly secured to your
child’s head. The helmet must have a strap
that goes under the chin with a buckle that
stays securely fastened. The helmet should be
worn level/low on the forehead, not tilted back.
The chinstrap should be adjusted so there is
no slack and it is fi rmly buckled (see helmet
instructions). After securing the helmet to your
child’s head, test to be sure that the strap
stays tight, the buckle remains secure and the
helmet cannot be removed from your child’s
head by twisting or pulling the helmet. Remind
your child to remove the helmet when playing
on any kind of playground equipment or any
place where the helmet may present a risk
of strangulation.
If the helmet is involved in a crash, replace
it or have it examined by the manufacturer
before reuse.
3
CAUTION
This product contains small parts
in its unassembled state.
Adult assembly is required.
M5 x 25 mm Screw x 4
Screws
