The All Terrain Switch Board
™
trucks are adjusted at the factory to the
stiffest setting (for beginner use). The stiff setting provides the greatest
stability. As your child becomes more comfortable and is better able to
balance on All Terrain Switch Board
™
, you can adjust the trucks (to a
loose setting) to allow greater steering control.
Counter-Clockwise
for Loose Setting
• Turn All Terrain Switch Board
™
upside-down on a flat surface.
Locate both trucks (on each end).
Hint:
Be sure to place a sheet or
towel on the surface to protect it.
• Using an adjustable wrench:
- Turn each nut
clockwise
for a
stiff
setting.
- Turn each nut
counter-clockwise
for a
loose
setting.
Hint:
You should not need to loosen
the nut more than a few turns for a
loose setting.
IMPORTANT! Check to be sure you
have not loosened the trucks too
much!
Pull on both trucks. The trucks
should remain on All Terrain Switch
Board
™
. If you can remove either of
them, you have loosened the truck(s)
too much. Replace the truck(s) and
tighten the nut(s) clockwise with an
adjustable wrench.
3
Adjusting the Trucks
Truck
Clockwise for
Stiff Setting
