background image

20

30

40

60 70

80

90

100

110

120

0

10

50

MPH

0

1

2

3

4

5

6

RPM x 1000

E

F

TEMP

100

210

260

®

LO

KC

HI

REV

FWD

TREB

IGNITION

6

9

Steering Wheel

Cap Nut

Steering 
Column

“UP”

Tab

• Turn the vehicle body upright.

• Position the steering wheel so that the spokes form a

“Y”

as shown. The tab on the steering wheel stem

should face up.

• Fit the steering wheel onto the steering column.

• Fit a cap nut onto the end of the steering column.

• Tap the cap nut with a hammer to secure it on the

steering column.

Helpful Hint!

You may want the help of another person to

support the steering column while you tap the cap nut with

the hammer.

Assembly

7

8

5

• Wipe the steering column with a paper towel to remove

any excess lubricant.

• Turn the vehicle body on its side.

• Insert the straight end of the steering column up through

the two holes in the vehicle body and out through the
hole in the dash.

13

Microphone

Dash

• Insert the end of the microphone cord though the hole 

under the dash and into the hood area.

• Place the microphone in the dash pocket.

Steering
Column

Hole

Bottom View

• Insert the end of the steering column through the hole in

the steering rod.

• Fit a cap nut onto the end of the steering column.

• While supporting the steering column, tap the cap nut

with a hammer to secure it on the steering column.

Helpful Hint! You may want the help of another person to
support the steering column while you tap the cap nut with
the hammer.

Steering Rod

Cap Nut

End of Steering Column

Bottom View

• Apply labels to the dash as indicated in the illustration.

8

10

11

15

22

18

20

17

21

Содержание BARBIE 78477





































Отзывы: