1.5V x 3
“AA” (LR6)
Shown Actual Size
For best performance, we recommend you replace
the batteries that came with this toy with three,
new alkaline batteries upon purchase.
• Locate the battery compartment on the underside
of the bus.
• Loosen the screw in the battery compartment cover
using a Phillips screwdriver. Lift to remove the cover.
(The screw will remain in the cover.)
• Remove the exhausted batteries. Dispose of the
used batteries safely.
• Insert three, new AA (LR6) alkaline batteries as
indicated inside the battery compartment.
Helpful Hint:
For longer battery life, we recom-
mend use of alkaline batteries.
• Fit the tab on the battery compartment cover into
the slot in the battery compartment and close
the cover.
• Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries:
alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Remove the batteries during long periods of
non-use. Always remove exhausted batteries
from the toy. Battery leakage and corrosion can
cause damage. Dispose of batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be
recharged.
• Only batteries of the same or equivalent type as
recommended in the “Battery Replacement”
instructions are to be used.
• If removable rechargeable batteries are used, they
are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the
toy before they are charged.
• If you use a battery charger, it should be examined
regularly for damage to the cord, plug, enclosure
and other parts. Do not use a damaged battery
charger until it has been properly repaired.
• If sound or lights from this toy become faint or
stop working, it’s time for an adult to replace
the batteries!
Battery Compartment
Back View
2
Battery Replacement
