Assembly
• Plug the power button harness into the motor harness.
Push firmly to snap the connectors together.
Motor Harness
Power Button
Harness
• Fit the connectors between the tabs inside the vehicle.
• Bend the wires down (90˚ angle).
• Fit the motor harness connector up through the square
hole in the bottom of the back fender.
• Carefully fit the back fender onto the vehicle.
DO NOT
pinch the motor harness.
• Insert four screws through the back fender and into
the vehicle, as shown.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• With the back end facing you, insert eight more screws
through the back fender and into the vehicle, as shown.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Tabs
Connectors
Back Fender
Motor Harness
Connector
Back Fender
Back Fender
Back View
24
25
Bend
Wire
Down
26
27
Motor Harness
28
15
