Use
7
• Push down on the product to be
sure each side of the base wire is
in the correct position. The base
wire should rest in the groove in
each frame.
• Repeat Use steps 1- 3 to unfold
the other base wire.
3
Base Wire
Groove
Frame
PUSH
PUSH
• Adjust the canopy up or down.
4
CORRECT
®
Canopy
Down
Canopy Up
Using the Canopy
• Position the product upright on a flat surface.
• Grasp both sides of a base wire.
• Pull both sides of the base wire outward and then let the
base wire rotate down.
Note:
If the base wire does not freely rotate down, pull the
sides of the base wire further outward.
To Unfold
1
Sides of Base Wire
• Lift the product up slightly so that each side of the base
wire
“snaps”
into the groove in each frame.
Make sure you
hear a “snap”.
Frame
Groove
Groove
Sides of Base Wire
2
