88
A
A S
S S
S E
E M
M B
B L
L Y
Y
• Fit a retainer to the
outside
of the seat back tube, as shown. Make sure
the socket in the retainer is upright.
• Insert a screw through the hole in the seat back tube, base tube and
into the
inside
of the retainer.
• Tighten the screw with a Phillips screwdriver. Do not over-tighten.
• Repeat this procedure to assemble the other retainer to the other side
of the seat back tube.
• Pull up on the seat back tube to be sure it is secure. If you can remove
either end of the seat back tube, you have not assembled it correctly.
Remove the screws, re-read and repeat Assembly steps 3 and 4.
Pull Up
Retainer
Socket
Socket
Retainer
4
4
79436pr-0920.qrk 9/22/00 11:01 AM Page 8
