• Snap the mirror and the paddles to the toy bar.
• The rings can be attached to the mirror and one of the
paddles, as shown.
Helpful Hint:
Twist the ends of the rings apart to attach
them to the mirror or paddle.
• The toy bar is removable. Simply pull out near each toy
bar plug to remove the toy bar.
Assembly is now complete.
Mirror
Paddle
Ring
9
OFF
ON
Fisher-Price
®
• Lift the front of the pad to locate the small lower pocket.
• Lift the footrest wire with soothing unit.
• Fit the pad pocket over the footrest wire with
soothing unit.
• Fit the small openings on each side of the pad over the
toy bar sockets.
• Lower the footrest wire with soothing unit.
Footrest Wire
with Soothing Unit
• Spread the toy bar ends outward to fit the plugs into the
toy bar sockets.
Helpful Hint:
The toy bar plugs are different sizes and
must be inserted into the proper toy bar socket. If the toy
bar plugs do not fit, turn the toy bar around.
Toy Bar
Socket
Toy Bar
Plug
Toy Bar
Socket
Toy Bar
Plug
Small
Lower
Pocket
Toy Bar
Socket
Wire Loops
Toy Bar
Socket
13"
• Periodically check to be sure the toy bar plugs are
approximately 13 inches apart. After several attach-
ments the toy bar plugs may spread further apart.
• If the toy bar plugs spread apart more than 13 inches,
grasp the toy bar with both hands near one of the top
corners. Bend the arm inward slightly.
• Grasp the toy bar with both hands near the other top
corner. Bend the arm inward slightly.
• Measure the distance between the toy bar plugs to
see if it is approximately 13 inches. If it is shorter or
longer, adjust the toy bar until the toy bar plugs are
approximately 13 inches apart.
Toy Bar Plug
Top Corner
Top Corner
Arm
Arm
Toy Bar Plug
Assembly
4
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.
©1999 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in Hong Kong
79339F - 0920
6
8
7
