• Place the base on the surface in which you intend to use the sandbox.
Note:
Assemble the panels to the base going in a clockwise direction.
• Fit the grooves on one of the panels to the ribs on the base, as shown.
• Fit another panel onto the base. Snap both tabs on the first panel into the slots on the
second panel.
1
Tab
Tabs
Slots
Grooves
2nd Panel
Clockwise
1st Panel
Base
Ribs
Assembly
Helpful Hint:
You may have difficulty snapping the panel tab closest to the base. Lift the
assembly up slightly. While pushing up from the underside of the assembly (directly below
the tab), push down on the topside of the assembly (directly above the tab).
• Insert and snap the tab on the outside edge of the first panel into the slot in the outside
edge of the second panel.
•
Repeat this procedure to assemble the remaining six panels to the base.
Please refer back to the original instructions, Assembly Step 2.
Tabs
Push Down
Push Up
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.
©1999 Mattel, Inc. All Rights Reserved.
Printed in U.S.A.
® and ™ designate U.S. trademarks of Mattel, Inc.
75967-0921
