3
#8 x 3" (7,6 cm) Screw – 1
Cap Nut – 1
#10 x
3
/
4
" (1,9 cm)
Screw - 11
#8 x
3
/
4
" (1,9 cm)
Screw - 13
All fasteners are shown actual size. Tighten and loosen the screws with a
Phillips screwdriver. Do not over-tighten the screws. For your convenience,
an extra cap nut is included.
Parts
Seat Pin
Seat
Handlebar
Handle Pin
Frame Cover
Handle Top
Handle Bottom
Base
2 Base/Handle Covers
Fork
Front Wheel Assembly
2 Fork Covers
4 Pedal Axle Covers
Straight Axle
2 Rear Wheels
Cap Nuts
2 Wheel Caps
Frame
Footrest
Note: The base/handle assembly can be attached to the trike in either the Ride-on Rocker (page 8) or Learn to Pedal mode (page 9).
Parts not shown: Assembly Tool and Label.