Activity Walker
Care
• This toy will also turn off automatically.
• Do not immerse this toy. Simply wipe the toy clean with a
damp cloth.
• If sound or light from/on this toy becomes faint, or if there
is no sound or light, remove the batteries and dispose of
them properly. Replace the batteries with three, size “AA”
(LR6) alkaline batteries.
• Press the lower button and continue to lift the rear legs until
the handle and rear legs snap into place.
IMPORTANT! Push down on the rear legs to be sure they are
secured into position.
Hint: To fold the rear legs flat for storage, simply press the leg
release knob in while pushing the rear legs down.
2
2
• The handle can be adjusted to the upper position for your
child’s comfort.
• While pressing the lower handle release button, pull the handle
up until it “snaps” into place.
• For sound and lights, slide the power switch to the ON position.
Hint: To lower the handle, press the upper handle release
button and push the handle down.
4
4
• Insert the attachment straps through the slots in the back of
Sing-Along Puppy
™
.
• Insert the strings into the slot on the back of Sing-Along Puppy
™
.
Insert
Strings
Here
Attachment Straps
3
3
Hint: To prevent scratching the toy’s decorated surfaces, place
the toy face down on a non-abrasive surface.
• While pressing the leg release knob, lift the rear legs.
1
1
Lift Legs
Lift Legs
Lift Legs
Leg
Release
Knob
Lift Legs
Lower Handle
Release Button
Upper Handle
Release Button
Power
Switch
FCC Note (United States Only)
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
If you have any questions about this product: In Canada, call 1-800-567-7724,
or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,
Ontario L5R 3W2. In Great Britain, telephone 01628 500303. In Australia,
Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond,
Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812
(valid only in Australia).
Button
