background image

cycle. Likewise, you can select ‘Eco’ and ‘Wrinkle Free’ to perform on the same cycle. Touch the appropriate
button until both options are selected. Repeat to deselect an option.

• For clothes care and performance reasons not all options may be available on some cycles.

Add a Garment

The ‘Add a Garment’ option enables you to add or remove items during the wash stage of the cycle, under certain
conditions. Once the ‘Add a Garment’ button is touched,
the button

and time to go will flash. Wait until you hear the door unlock. Open the door and add or remove items. Close the door
and touch

to restart the cycle. The ‘Add a Garment’ button will only operate during the wash part of the cycle and when the
temperature selected is lower than ‘Hot’ temperature. ‘Add a Garment’ can be used when the total wash volume has
been reached, as your washer will drain the water to a lower level if necessary, so the door can be opened.

Keylock

This option enables you to deactivate the buttons on the display panel, except for the ‘Power’ and ‘Keylock’ buttons. This
prevents accidental button presses.

To Turn Keylock Mode ON or OFF when the Washer is Powered On:

• Touch and hold the

button for 2 seconds.

When activated, the light above the

button is illuminated.

displayed on the display panel.

https://producthelp.fisherpaykel.com/us/Wash/Front_Loaders/WashSmart/WH2424P1/User_Guide_WH2424P1/11_wash_cycl…

Updated: Tue, 16 Nov 2021 12:13:06 GMT

Powered by

5

Содержание WH2424P1








Отзывы: