Fisher & Paykel WH1260P Скачать руководство пользователя страница 26

24

WASH CYCLE OPTIONS

All wash cycles default to the recommended options for that cycle based on the average 
expected load to be washed. You can vary the options (eg ‘Wash Temp’, ‘Spin Speed’) 
to create your desired cycle. Note: some options are not available on some cycles, for 
clothes care reasons or because the option is not appropriate for the cycle.

To change a wash option or options you have selected after a cycle has started, touch  

 and select your new setting, then touch 

 again to resume the cycle with the new 

setting or settings. Note: some options may not be available for selection under certain 
conditions and after particular stages of the cycle have passed.

Wash Temp

Your washer offers five wash temperatures:

Cold

30°C

40°C

60°C

90°C

Simply touch the ‘Wash Temp’ button to increase or decrease the wash temperature.

The washer will fill with both hot and cold water (if possible) to achieve the selected 
wash temperature. If required, ie for cold supply or cold connection only, the washer will 
heat the water to the selected temperature.

Some temperatures are not available on some cycles as a safeguard for your clothes 
(eg 60°C or 90°C on the ‘Delicate’ cycle).

IMPORTANT!

When 90

°

C temperature is selected, the door glass will become hot. Do not touch the 

glass part of the door. Keep children away from the washer.

Spin Speed

Your washer offers four spin speeds: 500 rpm, 800 rpm, 1100 rpm and 1400 rpm, plus 
an additional ‘No Spin’ option.

Simply increase or decrease the spin speed by touching the ‘Spin Speed’ button.

Selecting ‘No Spin’ will end the cycle after the rinse, allowing you to remove items you 
wish to drip dry. Note: the washer will complete the spins that are within the wash 
and rinse portions of the cycle; only the final spin will not be completed. If you have 
removed the items you wish to drip dry and there are items remaining that you would 
like to spin, press ‘POWER’ and select the ‘Spin’ cycle. If necessary, modify the spin speed 
to best care for your load (ie spin delicate items at 500 rpm for best garment care).

Soil Level

The ‘Soil Level’ option lets you adjust the wash to suit the amount of soil in your load. 
For example, select ‘Heavy’ for dirty clothes; for items that are only lightly soiled, select 
‘Light’. This adjusts the wash time accordingly to give the load the right amount of 
agitation to remove the soil.

Содержание WH1260P

















































Отзывы: