Fisher & Paykel WH1060P4 Скачать руководство пользователя страница 39

Страница: 39 / 52

TROUBLESHOOTING

The following is a list of problems you may encounter when using this appliance and some
suggestions that may help to correct the problem. If you still have problems, contact your
Fisher & Paykel trained and supported service technician.

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Washer not
turning on

Power not switched on at the wall.

Switch the power on at the wall. Press .

Household power supply
not working.

Try plugging in another electrical appliance.

Keylock may be activated.

Press and hold the

button for three seconds.

Pressing

does not start
the fill

Washer door not closed properly.

Open and reclose door.

The washer has detected a fault.

Check if a code is being displayed on the
control panel, refer to ‘Fault codes’.

Hot and cold taps not turned on.

Check that both hot and cold taps are
turned on (if using cold inlet only ensure
inlet valve cap is installed on the hot valve
on the washer).

Hot and cold taps not connected
to the corresponding valve on
the washer.

Check the cold tap is connected to the
cold valve on the washer and the hot tap is
connected to the hot valve.

Blocked hose filters.

Check the tap end of the inlet hose(s)
for blockages.

Inlet hose leaking, twisted
or damaged.

Check the inlet hose(s) for leaks or damage.
Check that the inlet hose(s) are not twisted.

Faulty water supply.

Check taps that aren’t connected
to the washer are working.

Delay start maybe set.

Refer to

‘DELAY START’

Washer stops
working mid
cycle

The washer has detected a fault.

Refer to ‘User warnings’ or ‘F ault codes’.

Power or water failure.

Check the power and/or water is
working correctly.

Washer has been paused.

Press the

button to continue.

Oversudsing.

Washer is waiting for suds to dissolve before
continuing the cycle.

Washer drains
while filling

Drain hose too low.

Ensure the height of the drain hose is at least
600mm from the floor level, ‘Draining’ in your
installation guide.

Drain hose sitting in water.

Clear the drain.

Содержание WH1060P4





















































Результаты поиска

Содержание WH1060P4

Отзывы:

Похожие инструкции для WH1060P4

Бренды по названию

Популярные бренды

Fisher & Paykel WH1060P4, Руководство пользователя

Результаты поиска

Содержание WH1060P4

Отзывы:

Похожие инструкции для WH1060P4

Бренды по названию

Популярные бренды