Fisher & Paykel WB60S Series, Руководство по установке

Страница: 10 / 16

9
1
2
1
2
3
6 DISCARD PACKAGING RESPONSIBLY
7 MARK AND PRE-DRILL THE HOLES FOR SECURING THE WARMING DRAWER
8 CONNECT THE WARMING DRAWER TO THE MAINS SUPPLY
Recycle responsibly
Unpack the warming drawer and inspect for any signs of damage.
Do not install the warming drawer if it has been damaged.
IMPORTANT!
Packing materials (e.g. plastic bags, polystyrene foam, staples,
packing straps etc) and tools should not be left around during
and after installation, especially if they are within easy reach of
children, as they may cause serious injuries.
IMPORTANT!
● ●
All electrical work may only be carried out by suitably qualified and competent persons in accordance with national and
local safety regulations.
● ●
This warming drawer must be earthed.
Before placing the warming drawer into the cavity, route the power cord into the back of the cavity and plug it in to the
switched socket. The switched socket should be in an easily accessible area within 900mm of the centre rear of the product.
Power requirements
Model Code Power Voltage Wattage
WB60SD 1.6 - 1.8 A 220-240 V 360-420W
IMPORTANT!
Do not lift the warming drawer by the drawer handle.