Problem
Possible Cause
What to Do
Hard Water
Increase the rinse aid setting and the amount of
detergent. See section ‘
’.
Models with built in water softener
(‘H’ models only):
Increase the water softener setting. See section
‘
’.
Models without built in water softener: If living in
an area with very hard water, consult a plumber on
installing a household water softener.
Foaming
Wrong type of detergent
used
ONLY use detergents for Dishwashers. See
‘
’.
Incorrect amount of
detergent.
See section ‘
’ or follow the detergent manufacturer’s
instructions.
Too much egg in the
wash load.
Increase the amount of detergent.
Rinse aid setting too
high.
Decrease the rinse aid setting.
Rinse aid dispenser plug
not closed properly.
Ensure that the rinse aid dispenser plug is closed
tight, with its hand grip pointing straight ahead.
See section ‘
Water leaking
Drain hose disconnected
from waste pipe.
Reconnect the drain hose to the waste pipe.
Water inlet hose not
properly connected.
Ensure the inlet hose is connected securely.
Other leaks.
Turn water and power supplies to the dishwasher
off. Call Customer Care or your Authorized
Service Centre. See your ‘Service and warranty’
booklet for contact details.
Rinse aid dispenser plug
not closed properly.
Ensure that the rinse aid dispenser plug is closed
tight, with its hand grip pointing straight ahead.
See section ‘
Updated: Fri, 12 Nov 2021 19:46:54 GMT
Powered by
2
