9
INSTALLATION INSTRUCTIONS
Product installation
●
●
Your Wine Cabinet is fitted with rear rollers designed for moving the product in the
forwards and backwards direction.
●
●
Avoid moving the product in a sideways direction as this may damage the floor
covering/surface.
●
●
Your Wine Cabinet will arrive with the front feet raised making moving the product into
its final location a simple task.
●
●
Move the Wine Cabinet into its final position making sure there is correct clearances
between the product and surrounding cabinetry.
Aligning your wine Cabinet with cabinetry
●
●
Align the sides of the product with the cabinetry by adjusting the hinge side front foot.
●
●
Adjust the handle side foot until it touches the floor and takes a small amount of weight.
●
●
Once the product is in place and aligned with cupboards/alcove gently push on the
front top and check if the product is rocking or stable.
Levelling your wine Cabinet
●
●
It is important that all four corners of
the Wine Cabinet base are supported
firmly on the floor to eliminate any
cabinet movement.
●
●
Installing the appliance on a soft or
uneven/unlevelled floor may result
in twisting of the cabinet and poor
sealing of the door.
●
●
The cabinet has adjustable feet, which
can be used to level the product.
Remove the feet cover, turn the feet
clockwise to raise the appliance
or counter-clockwise to lower the
appliance, until it is stable. This will
ensure a good door closing action.
Replace the feet cover.
●
●
The front levelling foot on the hinge
side should take majority of the
cabinet’s weight and be stable, ie the
cabinet should not rock or wobble.
To remove, pull the feet
cover towards you
Counter-clockwise
to raise feet
Clockwise to
lower feet