Anti-tip Stability Device Installation Instructions
1. The anti-tip bracket has to be attached as shown on figure below (only rear left side), it has to be fixed on
the floor OR on the rear wall by no. 4 (four) suitable screws (not supplied). Alternatively the anti-tip bracket
can also be fixed on the floor AND on the rear wall by no. 8 (eight) suitable screws (not supplied).
2. After fixing the anti-tip bracket, slide range into place. Be sure the rear left foot slides under the anti-tip
bracket attached.
Updated: Fri, 06 Dec 2019 03:20:08 GMT
Powered by
7
