WHAT?
HOW OFTEN?
HOW?
IMPORTANT!
solution of hot water and mild
detergent.
1. Wipe dry with a soft cloth. Note:
the drawer may be removed to
make cleaning easier.
and stubborn, we recommend removing any
easy-to-reach spills, food or greasy stains
from the enamel after each use.
Drip tray under
door (OR36
models only)
1. Remove oven door.
2. Wipe with a damp cloth and a solution of hot water and mild detergent.
CookTop Parts
Aluminum and
enamelled
Burner caps
and flame
spreaders
1. Check that the burner is turned
OFF and allow it to cool.
2. Lift off the burner cap and brass
flame spreader.
3. Wash them in hot soapy water,
rinse, and dry.
◦ Use a stiff nylon brush or
straightened paper clip to
clear the notches of the
flame spreader.
4. Replace the flame spreader and
burner cap correctly. See
‘Replacing the burner parts’.
Brass burner parts only:
For extra shine and to remove tarnish
use a suitable brass cleaner and
polish, following manufacturer’s
instructions.
•
Keep the notches of the flame spreaders
clear. Soiling may clog these and cause
ignition problems.
•
Before replacing the burner parts, check that
they are dry. Wet burner parts may result in
an irregular flame.
•
Before lighting a burner you have
reassembled, check that all of its parts are
positioned correctly. Incorrect assembly can
cause dangerous irregular flames and ignition
problems.
•
Do not put any burner parts in the dishwasher
as they will become discolored.
Updated: Sat, 09 Jul 2022 14:42:33 GMT
Powered by
5