Fisher & Paykel OB90 Series, Руководство по установке

Страница: 8 / 12

7
9 SECURE THE OVEN TO THE CABINETRY
!0 REFIT THE DOOR
IMPORTANT!
z z
Take care not to damage the upper trim of the oven or the door sensor lever.
z z
Do not over-tighten the screws.
z z
Do not seal the oven into the cabinetry with silicone or glue. This makes future
servicing difficult. Fisher & Paykel will not cover the cost of removing the oven, or
damage caused by this removal.
1
Position the oven in the prepared cavity.
2
Lift from both sides placing hands under the oven chassis.
3
Push oven in, ensuring you’re not pushing on the vents or control panel.
4
Secure oven to cabinetry using supplied screws.
1
Hold the door firmly and insert the hinge tongues
into the slots on either side.
2
Ensure that the notices on both sides drop into the
places shown before opening the door to its full extent.
3
Fully close the levers on the left and right hinges.
4
Close the door and check that it is properly in place;
it should sit square to the oven vent louvres and the
control panel.
Notch