
43
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Self Clean function
During a Self Clean
cycle, the oven is louder
than usual.
This is normal: the oven’s cooling fans operate at their highest
speed.
The display shows
The door has not been properly
closed.
Make sure you close the door
properly.
The display shows
:
but the oven door will
not open.
The oven door is locked
because the oven is still too hot
to be used for cooking.
Wait until the Self Clean
cycle has finished. If you
cancelled a Self Clean cycle
which was already underway,
the oven still needs to cool
down before it can be
used. The oven door will
automatically unlock.
A
t a point during a Self
C
lean cycle, the function
dial halo goes out
and the temperature
indicator starts
displaying cascading
bars
.
This is normal: the oven is
in the last phase of the Self
Clean cycle, cooling down.
Wait until the Self Clean
cycle has finished. A long
tone will sound and the
oven door will automatically
unlock when the oven is
ready to use.
I have cancelled a Self
Clean cycle but cannot
use the oven:
- the oven door will not
open
- the display is still
counting down
minutes or showing
:
- the Self Clean
function indicator is
still lit
- the temperature
indicator shows
cascading bars
- the dials and buttons
are unresponsive.
This is normal: if the function
dial halo is unlit, you have
successfully cancelled the
Self Clean cycle. However, the
oven is still too hot to be
used for cooking and
needs to cool down.
Wait until the cool-down
phase has finished. A long
tone will sound and the
oven door will automatically
unlock when the oven is
ready to use.
Note: depending on when
the Self Clean cycle was
cancelled, the cool-down
phase may take up to 45
minutes.
The oven is beeping and
the display shows
or
.
See section ‘Alert codes’ for instructions.
Содержание OB90 Series
Страница 1: ...Built in Oven OB90 pyrolytic models NZ AU GB IE USER GUIDE ...
Страница 2: ......
Страница 51: ......