background image

2

SAFETY AND WARNINGS

1

 

WARNING!

 

Electrical shock hazard

 

   

 

Before carrying out any work on the electrical section of the appliance, it must    
be disconnected from the mains electricity supply.

Connection to a good earth wiring system is absolutely essential and
mandatory.
 
Alterations to the domestic wiring system must only be made by a qualified  

 

electrician.

 

Failure to follow this advice may result in electrical shock or death.

 

WARNING!

 

Cut hazard

 

   

 

Take care - some panel edges are sharp.

 

Failure to use caution could result in injury or cuts.

 

IMPORTANT SAFETY INSTRUCTIONS! 

 

To avoid hazard, follow these instructions carefully before installing or using this appliance.

 

Please make this information available to the person installing the appliance - doing so could 
reduce your installation costs.

 

This appliance must be installed and connected to the mains power supply only by a suitably 
qualified person according to these installation instructions and in compliance with any applicable 
local building and electricity regulations. Failure to install the appliance correctly could invalidate 
any warranty or liability claims.

 

If the power supply cable is damaged, it must be replaced by the manufacturer, its service agent or 
similarly qualified person in order to avoid a hazard.

 

Isolating switch: make sure this oven is connected to a circuit which incorporates an isolating switch 
providing full disconnection from the power supply in accordance with the wiring rules.

 

The oven must be earthed.

 

Do not use adaptors, reducers or branching devices to connect the oven to the mains electricity 
supply, as they can cause overheating and burning.

 

WARNING!

 

Fire hazard

 

   

 

Do not use adapters, reducers, or branching devices to connect this appliance to 
the mains power supply.

 

Failure to follow this advice may result in overheating, burning, or fire.

409 lb

186 kg

242 lb

110 kg

 

WARNING!

 

 

 

 

Very Heavy

 

   

 

 

Do not attempt to lift this product unassisted.

 

 

Lifting unassisted may cause serious injury.

SINGLE

 

ove

n

 

models

DOUBLE

 

ove

n

 

models

Содержание OB76DD













Отзывы: