background image

1

SAFETY AND WARNINGS

WARNING!

To avoid hazard, follow these instructions carefully before installing or using this appliance.

z

z

Please make this information available to the person installing the appliance  

— doing so could reduce your installation costs.

z

z

This appliance must be installed and connected to the mains power supply only 

by a suitably qualified person according to these installation instructions and 

in compliance with any applicable local building and electricity regulations.  

Failure to install the appliance correctly could invalidate any warranty or  

liability claims.

z

z

If the installation requires alterations to the domestic electrical system, call a 

qualified electrician. The electrician should also check that the socket cable section 

is suitable for the electricity drawn by the oven.

z

z

The oven must be earthed.

z

z

If the power supply cable is damaged, it must be replaced by the manufacturer, 

its service agent or similarly qualified person in order to avoid a hazard.

z

z

Isolating switch: ensure this oven is connected to a circuit which incorporates 

an isolating switch providing full disconnection from the power supply in accordance 

with the wiring rules.

z

z

Do not use adaptors, reducers or branching devices to connect the oven to the mains 

electricity supply, as they can cause overheating and burning.

z

z

Ensure the cavity is completely sealed with no gaps. This is to ensure the oven cooling 

system functions correctly.

z

z

The appliance must not be installed behind a decorative door in order to 

avoid overheating.

!

 WARNING!

Electric Shock Hazard

Failure to follow this advice may result in 

electric shock or death.

•  Before carrying out any work on the electrical 

section of the appliance, it must be disconnected 

from the mains electricity supply.

•  Connection to a good earth wiring system is 

absolutely essential and mandatory.

•  Alterations to the domestic wiring system must 

only be made by a qualified electrician.

!

 WARNING!

Fire Hazard

Failure to follow this advice may result in 

overheating, burning, and injury.

•  Do not use adapters, reducers, or branching 

devices to connect this appliance to the mains 

power supply.

!

 WARNING!

Cut Hazard

Failure to use caution could result in injury.

•  Take care: some edges are sharp.

IMPORTANT!

SAVE THESE INSTRUCTIONS

The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, 

please go to our website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.

!

 WARNING!

409 lb

186 kg

242 lb

110 kg

Very Heavy

Failure to follow this advice may result in 

serious injury.

•  Do not attempt to lift this product unassisted.

Содержание OB76D

















Отзывы: