Fisher & Paykel OB60SDPT, Руководство по установке

Страница: 3 / 12

3
Screws (2) Metal side shelves
fixing nut (2)
Ensure that:
the countertop and oven cavity are square and level, and are the required dimensions
the installation will comply with all clearance requirements and applicable standards and regulations
the isolating switch will be easily accessible to the customer with the oven installed
the electrician provides sufficient free length of power supply cable to reach from the bottom rear of the cavity to at least 1.5 metres in front of the bottom edge of the opening
the cable may enter the cavity from the side, top or bottom, but top entry must be at the rear of the cavity
the oven connection socket (if fitted) is outside the cavity if the oven is flush to the rear wall
the oven will rest on a surface that can support its weight
the height from the floor suits the customer
you consult local building authorities and by-laws if in doubt regarding installation
IMPORTANT!
Some environmental factors and cooking habits can cause condensation in and around the oven during use. To protect surrounding cabinetry from possible damage caused by frequent or
excessive condensation, we recommend moisture-proofing the oven cavity.
z
z
the oven door can open fully without obstruction.
z
z
the power supply cable does not touch any hot metal parts.
z
z
the isolating switch is easily accessible to the customer with the oven installed.
z
z
you complete the ‘Final checklist’ at the end of the installation.
z
z
If, after following the instructions given, correct performance cannot be achieved, please contact your nearest Fisher & Paykel Authorised Service Centre, Customer Care, or contact us
through our local website listed at the end of this document.
PARTS SUPPLIED
PRIOR TO INSTALLATION
AFTER INSTALLATION