Fisher & Paykel OB60N8DTX, Инструкция по установке и руководство пользователя, Страница: 25 / 28

23
If you have a doubt about the correct functioning of your oven, this does not necessarily mean
that there is a malfunction. In any event, check the following items:
Important!
Repairs to your appliance should only be performed by professionals. Non-standard repairs can
be a source of danger for the user.
Error codes
F01
Probe error (oven centre)
F02
Overheated oven
F05
Other cooking problems
F10
Information: Power cut during cooking
AUTO
Auto Stop: cooking time too long
Troubleshooting
Problem Possible causes What to do
The oven is not
heating
The oven is not connected
to the power supply.
- Your fuse is out of order.
- The selected temperature
is too low. Make sure that the oven is connected to the
power supply.
Replace the fuse in your electrical set-up and
check its capacity (16A).
Increase the selected temperature.
The oven light is
not working. The light is out of order. Call Customer Care.
Your oven starts
beeping. During cooking.
- At the end of a cooking
cycle.
The recommended temperature of your
choice has been reached.
- Your programmed cooking cycle is finished.
The cooling fan
continues to
operate after the
oven stops. - The fan should work for a
maximum of one hour
after cooking, or when the
oven temperature is
greater than 125°C. If it does not stop after 1 hour, open the oven
door to accelerate the cooling down of the
oven
Call Customer Care.