Service Manual 547226: OB30
December 2012
19
2.30
Self-Clean Pyrolytic Cycles
2.30.1
3 hour Cycle
Duration:
3hrs
Pyro Temp:
925
°
F (500
°
C)
Heat-up time:
50 minutes approx.
Holding time:
100 minutes approx.
Cool-down time:
30 minutes
If a Self-Clean Cycle will not start, check that there are no meat probes inserted and that
the control knobs of the cavity that is not being cleaned (in a double oven) are in the
‘OFF’ position.
The oven self-clean mode operates by heating the oven to a temperature of
approximately 925
°
F (500
°
C). This burns off and breaks down soil and grease deposits.
The ash residue that remains can simply be removed from the cool oven with a damp
cloth or sponge. The self-clean cycle normally takes about three hours.
To start a Self-Clean Cycle
1. Turn the oven mode dial until ‘Self Clean’ appears in the display.
2. Select the maximum temperature using the temperature dial.
‘000’ will appear in the temperature display. This will change to when the
cycle begins.
‘Door Lock’ and ‘Clean’ will show in the clock display.
The door lock will automatically activate once the Self-Clean mode and maximum
temperature have been selected.
A countdown of minutes remaining will be shown in the clock display.
The Broil / Grill inner element and the vent fan operate during the Self-Clean Cycle.
Additionally, during the first fifteen seconds of each minute the bake element is on and
during the third fifteen seconds of each minute the Broil / Grill outer element is on.
The cooling fan for the cavity being cleaned will be on high speed. The cooling fan for
the other cavity will be on low speed.
During the Self-Clean Cycle in a double oven, the cavity not being cleaned cannot be
operated in any mode.
The oven heats for its cleaning temperature and maintains this temperature
approximately 2½ hours into the cycle.
The elements then turn off and the cool down period commences. When the
temperature reduces to 356°F (180°C) the door will unlock and the ‘Door Lock’ display
will disappear from the clock display.
When the self-clean cycle has finished, ‘Clean’ and ‘00:00’ will flash in the clock display
until the product is returned to manual operation. Press the PUSH TO CLEAR button
and turn the oven mode and temperature dials to the OFF position to do this.
At the completion of the self-clean cycle, there may be grey ash deposited on the inside
of the oven. The amount of ash is dependent on the amount of soil in the oven before
cleaning. To remove the ash, wait until the oven has completely cooled. The bulk of the
ash is easily removed with a small brush or dry cloth, then by wiping over with a damp
cloth.
The self-clean mode can be cancelled at any time by turning the oven dials to ‘OFF’.
‘Clean End’ will appear in the oven mode display but if the oven temperature has already
reached 482°F (250°C) the door lock will remain act ivated until the oven cools to 356°F
(180°C).
Содержание OB30DDEPX1
