18
Adjusting the Wash Settings
After using your
Intuitive
™ washer you may want to fine-tune some of the options to suit your
wash needs.
Anything changed in this menu is a permanent change,
unless ‘Reset Defaults’ is
selected, see page 20.
To Access the Adjust Settings Menu:
■
Push the
OPTIONS
UP
or
OPTIONS
DOWN
button,
and hold down for 2 seconds. The Adjust Options
Menu will then be displayed.
■
Scroll through the screens until the option you
wish to adjust is shown. Press options
UP
or
DOWN
to scroll.
■
Press
ADJUST
to highlight the option you want.
This option will be permanently set. To unset the
option repeat above steps.
S1 Wash Temp Adjust = Temperature of Wash Water
The wash temperatures can be adjusted if you think they are too hot or too cold.
■
Access the Adjust Settings Menu (refer above).
■
Scroll to the
TEMPERATURE ADJUSTMENT
screen.
■
Use the
ADJUST
button to move the cursor through the boxes to decrease or increase the
wash temperature (The numbers in the boxes are in degrees). Each movement is approximately
2˚C. Press
HOME
once the box with the number of degrees you want to change the wash
temperature to is highlighted.
S2 Auto Water Level Adjustment
If you are not satisfied with the water level that your
Intuitive
™ washer fills to on auto water level,
you can increase or decrease the fill level that auto will select.
■
Access the Adjust Settings Menu (refer above).
■
Scroll to the
AUTO WATER LEVEL
screen.
■
Use the
ADJUST
button to move the cursor through the boxes to decrease or increase the fill
level. The boxes on the left side of the centre point decrease the fill level and those boxes on the
right increase the fill level. Then press
HOME
.
Note:
If you feel there is not enough water for the load, we recommend you check by pausing the
machine and pushing the clothes down to see how much spare water is at the bottom of the
bowl. Clothes often float and your washer can sense the water under the clothes.
Hold down for 2 seconds
Содержание Intuitive eco IW512
Страница 39: ......
