Installation sheet
Top Mounting (Preferred installation method)
1. Use template provided on the reverse page.
2. Cut or fold along the dotted edge.
3. Align template with the inside cupboard wall and the front of the cupboard door and drill holes.
Keep opposite side door to which you are drilling closed in order to align template correctly.
4. Screw down through shelf into plastic lugs in slideout.
Position front left hand corner
Position front right hand corner
Position front left hand corner
Position front right hand corner
Align cupboard door front
Align with inside left cupboard wall
Align with inside right cupboard wall
Align cupboard door front
Align with inside left cupboard wall
Align with inside right cupboard wall
Cupboard wall
Cupboard door
Side Mounting
1. Remove filter.
2. Remove thin plastic skin (A) from each side fixing hole (see diagrams below).
Robinhood recommends an 8mm diameter drill be used.
3. Position slideout (ensuring unit is level) and fix in place using screws and hollow dowels
through each side fixing hole (see diagrams below).
Slideout Side
Hollow Dowel
Cupboard
(A)
IMPORTANT ***To correctly align the front rail of the slideout flush with the cabinets.
Keep the opposite side door, to which you are drilling, closed. See diagram below***
111052 Iss A
ECN: 07 039
