Fisher & Paykel ELBA OB60SC, Руководство по установке

Страница: 8 / 12

7
6 ELECTRICAL CONNECTION 7 SECURING THE OVEN TO THE CABINETRY
IMPORTANT!
● ●
This oven must be connected to the mains power supply only by a suitably qualified
person.
● ●
This oven must be earthed.
Before connecting the oven to the mains power supply, check that
● ●
the domestic wiring system is suitable for the power drawn by the oven
(as specified on the rating plate)
● ●
the voltage corresponds to the value given on the rating plate.
1
Position the oven in the prepared cavity.
IMPORTANT!
Do not lift the oven by the door handle.
2
Open the oven door fully.
3
Mark and pre-drill the screw holes.
4
Use the supplied screws to secure the oven to the cabinetry.
IMPORTANT!
● ●
Do not over-tighten the screws.
● ●
Do not seal the oven into the cabinetry with silicone or glue. This makes future servicing
difficult. Fisher & Paykel will not cover the costs of removing the oven, or of damage
caused by this removal.
(OB60SC SIDE OPENING MODELS ONLY)
To replace the door
(if previously removed)
1
Fit the door back onto the hinge
and replace the four inner
screws holding it in place.
IMPORTANT!
● ●
Ensure the screws shown are
correctly located and fully
tightened.
● ●
Ensure the door is correctly
aligned and gaps around the
door are consistent.
Unclip
and lift up
L
1
N(L
2
)
E
Brown
(Live)
Ensure cable
clamp is tightened
with screw
(you may have
to remove the
screw first
before fitting
the clamp)
L
N
Green
& Yellow
(Earth)
Blue
(Neutral)
Oven may vary
MODEL CODE MAX POWER (W) HZ VOLTAGE (V) AMPS (A)
OB60SC... 3000 50 Hz 220 - 240 V~ 13
4 Inner door hinge
screws