5
SETTING DELAY START
This feature can delay the start of a wash programme by 1 to 12 hours.
1
Load the dishes, add detergent and close the door.
2
Open the door to turn the dishwasher on.
3
Check that the display shows the wash programme you require. If not, see instructions
for ‘Changing the wash programme’.
4
Touch and hold
z
The delay start indicator
will light up and the display will show the
delay time (hours).
5
Touch again to increase the number of hours you wish to delay the wash by
(1hr – 12hr in hour steps).
Note: Scrolling past 12 hours will exit delay start.
6
Press and hold start button to start delay. The display will countdown in hours. The
wash programme will automatically start when the delay time is over.
z
The Delay start indicator will be on when Delay start begins its countdown.
z
If the door is open when the countdown is finished, the dishwasher will beep and the
display will flash. After 7 seconds the dishwasher will turn off.
To cancel Delay start
, touch the start button until the delay hour is 12h, then press start
button again to cancel delay.
touch and hold