19
SETTING A DELAYED START - CH & CHP MODELS
Delay start
This feature can delay the start of a wash programme from 1 to 12 hours.
To activate Delay start:
1
Load the dishes, add detergent and close the door.
2
Press
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
to turn the dishwasher on.
3
Select the wash programme.
4
Press Delay. The display will change to
1h
(the
h
will flash). Press the button again until
the display shows the required delay (each press increases the delay by 1 hour up to 12
hours).
5
Press
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
to begin the Delay start.
The
h
will stop flashing. The display will show the countdown in hours. The wash
programme will automatically start when the delay time is over.
To cancel Delay start, press
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
.
Keylock
This feature disables all the buttons on the dishwasher.
To activate Keylock, press and hold
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
until the Keylock indicator will light up to indicate
that Keylock has been activated.
The display will remain on (if no programme has been started it will continue to flash
while the control panel is locked).
To cancel Keylock, press and hold
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
until the Keylock indicator goes out to indicate
that Keylock has been cancelled.
If any other buttons are pressed while Keylock is activated, the the Keylock indicator will
flash for a few seconds.
