7
OPERATING INSTRUCTIONS
Controls and starting a wash
Start a wash programme
1
Open the door to turn ON the dishwasher.
– The display will show the wash programme time.
2
Select desired wash programme on the dishwasher control panel.
– The default cycle when you first turn the dishwasher on is Eco.
– After the first wash the dishwasher will remember the last programme used.
3
Select a wash modifier (for DW24U6I models only). The selected wash modifier
indicator will be lit. (see ‘Selecting wash modifiers’).
4
Press and close the door to start the wash programme
Pause and restart a wash programme
1
Open the door carefully to pause the programme. The time remaining will flash
and the pause beep will sound while the dishwasher is paused.
IMPORTANT!
There is a risk of being sprayed with hot water. Do not fully open the door until
the spray arms have stopped rotating.
2
Load, remove, or rearrange any dishes if needed.
3
Touch button and close the door in 4 seconds to restart the programme.
If the dishwasher is not restarted within 7 minutes, it will then beep until the cycle
is restarted.
Cancel or change a wash programme
1
Open the door carefully to pause the programme.
2
Touch and hold to cancel the programme.
3
Touch any button to turn the dishwasher back on, and follow the steps
above ‘To start a wash programme’.
EN
