Fisher & Paykel DOUBLE DISHDRAWER DD60DDF Series, Руководство по установке

Страница: 27 / 32

11
3
1
2
1
2
!2
THERE ARE TWO DIFFERENT PLUMBING AND DRAINAGE OPTIONS. CHOOSE WHICH IS MORE SUITABLE.
DRAINAGE OPTION 2
Dishwasher using drain hose joiner onto sink trap/waste tee
min. radius 200 mm
7
50 - 883 mm
7
50 - 883 mm
min. 500 mm
min. 500 mm
min. radius 200 mm
step 13
step 13
Supplied drain
hose joiner to suit
19 mm waste tee
DRAINAGE OPTION 1
Dishwasher and Ø 38 mm Standpipe
7
50-883 mm
7
50-883 mm
38 mm
max.
120 mm
Screw Drain hose
support to back wall
at correct height.
If space is limited
for fixing, push
hose through drain
hose support
to required height.
Screw Drain hose
support to back wall
at correct height.
If space is limited
for fixing, push
hose through drain
hose support
to required height.
IMPORTANT!
Ensure that drain hose is installed as close to the underside of the
benchtop as possible. This will ensure no waste re-enters the drain hose
in the event of poor flow or a blockage in the plumbing.
Ensure the drain hose does not extend into water retained in the trap; an
air gap is required to prevent waste water from siphoning back into the tub.
IMPORTANT!
Ensure that drain connection complys with local plumbing regulations.
Ensure drain hose is routed
straight to the joiner so
that waste water does not
accumulate in the hose.
Remove
excess
drain hose
material if necessary.
Do not shorten the inlet hose.