Clamp (1)
Wire clip (2)
Phillips
16 mm
screws (9)
Drain hose
support (1)
Moisture protection
tape (1)
(to prevent moisture
damage)
Drain hose
joiner (1)
Top
mounting
brackets (2)
OPTIONAL
Prefinished toekick (1)
white or black
Rubber
washer for
inlet hose (1)
Hexagonal
socket (2)
(long & short)
If the Drain hoses supplied are not long enough to reach your services, you
must
use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m. The kit is available from the nearest
Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.
PARTS SUPPLIED
4
5
CAVITY PREPARATION
*
Note: Services can be locat
ed
either side of DishDra
wer®.
220-240 VAC min. 9.5 A
min.
200 mm
10 mm
min. ø
60 mm
Moisture
protection
tape must
be applied.
*
Water supply
Waste disposal
(optional)
Side mounting
bracket kit
(A and B)
(2)
OPTIONAL
(2,1) -1- 599684C DD60D installA2 NZGB.indd 26/4/10 11:07:19 AM
(2,1) -1- 599684C DD60D installA2 NZGB.indd 26/4/10 11:07:19 AM
