background image

8

INSTALLATION INSTRUCTIONS

Read and follow the ‘Safety and warnings’ and ‘Installation instructions’ sections 

carefully before using your dryer!

Moving your appliance

When moving your dryer only tip towards the right hand side (when viewed from 
the front). If the dryer has not been transported as described, leave it standing 
upright for at least one hour before turning on.

Accessories

Check you received the following accessories with your Fisher & Paykel dryer. 
You will find them inside the drum:

 

z

1 x Drying rack

 

z

1 x Drain hose

 

z

1 x Installation guide / User guide.

Unpacking

To ensure the best performance from your new dryer follow the instructions below.

Removing the packaging

Remove the outer packaging (including the polystyrene packer and plastic wrapping). 
All packaging must be removed prior to use. 

Tilt the machine backwards and ‘walk’ it off the base one foot at a time. 
Not doing so may cause damage to your floor and dryer.

Remove all packaging and accessories from inside the drum and ensure you 
remove protective covers from door and console.

 

z

Ensure packaging materials are kept out of reach of children. 

 

z

Please help protect the environment and dispose of the packaging from around 

the dryer in an environmentally friendly manner. 

Location

Note: this dryer CANNOT BE INVERTED AND 

MOUNTED ON THE WALL. 

Содержание DH9060P









































Отзывы: