Fisher & Paykel DE60F60EW1, Инструкция по установке и руководство пользователя

Страница: 6 / 20

4
Technical specifications
Models Specification
Height / Height for built-under installation (mm) 850 / 820
Width (mm) 595
Depth / Depth for built-under installation (mm) 540
Height adjustment of feet (mm) 5
Weight, unpacked (kg) 29
Voltage 230 - 240V, 50Hz
Connected load 2000 - 2200W
Fuse protection 16A
The proper location
ƒ
Install your machine in environments which have no risk of freezing and in a stable and
level position.
ƒ
Do not install the machine behind lockable door, a sliding door, or a door that is hinged on the
opposite side to that of the dryer, in such a way that the door of the machine cannot be opened fully.
ƒ Do not place your machine on a carpet covered floor, a long pile rug or on similar surfaces.
ƒ Operate your machine in a well ventilated, dust-free environment.
ƒ Make sure that your machine is not placed on the power cable.
Place it at least 30 mm away from the edges of other furniture and walls.
Place the machine on a sound floor.
ƒ
A special part (Part No. 791746) must be used if the machine is to be installed under a counter or
in a cupboard. This replaces the top trim and must be installed by a Fisher & Paykel Authorised
Repairer. Never operate the machine without the top trim.
ƒ
If the machine is to be placed on top of a washing machine, the approximate weight together
may reach 180 kg when they are full.
A stacking kit should be used between the products, fitted to the washing machine.
Stacking Kit White Part No. 790691
Levelling
In order to ensure that your machine operates quietly and vibration-free, it must stand level and
balanced on its feet.
Balance the machine by adjusting the front feet. Loosen the feet by hand, and adjust them until
the machine stands level and does not rock.
ƒ
Never unscrew the adjustable feet from their housings.
Two plastic pieces supplied together with the Installation Instructions and User
Guide prevent your machine from slipping on wet and slippery surfaces. Tilt your
machine to backwards to install these plastic parts. Fit the plastic parts to the
front adjustable feet. Press on the plastic parts to fix them in their places. Check
the balance of your machine again and readjust the adjustable feet if necessary.
Installation instructions
Fig.1 Fitting the
non-slip foot caps